Optoma WHD200 - Manual (Page 18)

18
(8) If all operation is normal, the POWER LED and INFO./CHANNEL LED will glow in solid blue.
Please refer to the below form containing detailed LED indicator and OSD description of
transmitter / receiver:
Item /
Mode
Status Description
Power LED
(on RX)
Status LED
(on RX)
OSD Display
(on RX)
Standby For power saving mode. Static Red off
Initial Boot
up / Warm
up
It will spend 15 ~ 20
seconds for system boot
up.
Blinking
Blue
Blinking
Searching
available
channels
Continuing search
available channels If
system can’t establish
link over 80s after
initialization.
(Note A & D)
Blinking
Blue
Blinking
No input from selected
source
(Note B)
Static Blue
Blinking
(Quickly)
Video format not
recognized
(Note C)
Static Blue
Blinking
(Slowly)
Wireless
linked
Mode
Video format is
recognized
Static Blue Static Blue -
Looping display
these two OSD
4 level, looping.