Optoma WHD200 - Manual (Page 24)

24
5.
Supported Resolution
If the SOURCE LED continues to blink in blue (slower than “no signal” mode); OSD display: ,
and there is no video displayed or the video quality suffers, it indicates that the video frame rate
from your A/V source device is not supported. Ensure that the consumer timing of your HD device
is compliant with the standard listed below:
2D
Video Format Timings Resolution Support
Primary CEA Video Timing
640x480p @ 59.94 / 60Hz YES
720x480p @ 59.94Hz YES
720x480p @ 60Hz
480p
YES
720x576p @ 50Hz 576p YES
1280x720p @ 50Hz YES
1280x720p @ 59.94 / 60Hz
720p
YES
1920x1080i @ 50Hz YES
1920x1080i @ 59.94 / 60Hz
1080i
YES
1920x1080p @ 50Hz YES
1920x1080p @ 59.94 / 60Hz
1080p / 60
YES
Secondary CEA Video Timing
1920x1080p @ 23.98 / 24Hz YES
1920x1080p @ 25Hz YES
1920x1080p @ 29.97 / 30Hz
1080p / 24
YES
VESA Timing (DVI only)
640x480 @ 59.94 / 72.809Hz VGA YES
800x600 @ 60.317 / 72.188Hz SVGA YES
1024x768 @ 60 / 70.069Hz XGA YES
1280x768 @ 60 Hz WXGA YES
1280x1024 @ 60 Hz SXGA YES
1600x1200 @ 60Hz UXGA YES