AXING SPL 2-00 User Manual
Page 2
Operation Instructions
SPL 2-00/-01
2
© AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
26.11.12
Safety Notes
Do NOT use this product near water, for example, in a wet basement or near a
swimming pool.
Do NOT expose your device to dampness, dust or corrosive liquids.
Do NOT store things on the device.
Do NOT install, use, or service this device during a thunderstorm. There is a
remote risk of electric shock from lightning.
Connect ONLY suitable accessories to the device.
Do NOT open the device or unit. Opening or removing covers can expose you to
dangerous high voltage points or other risks. ONLY qualified service personnel
should service or disassemble this device. Please contact your vendor for further
information. Make sure to connect the cable to the correct port.
Place connecting the Ethernet cable carefully so that no one will step on them or
stumble over them.
Always disconnect the Ethernet cable from this device before servicing or
disassembling.
Do NOT allow anything to rest on the adapter and Do NOT place the product where
anyone can walk on the adapter.
If the adapter is damaged, remove it from the power outlet.
Do NOT attempt to repair the adapter. Contact your local vendor to order a new
one.
Do NOT use the device outside, and make sure all the connections are indoors.
There is a remote risk of electric shock from lightning.
Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your
device.
The maximum power loading of pass-thru power outlet is 1.84KW. Don't plug in any
device with more than over 1.84KW to the pass-thru power outlet.
Your product is marked with this symbol, which is known as the WEEE mark. WEEE
stands for Waste Electronics and Electrical Equipment. It means that used electrical
and electronic products should not be mixed with general waste. Used electrical and
electronic equipment should be treated separately.