AXING SPL 2-00 User Manual
Page 6
Operation Instructions SPL 2-00/-01
Chapter 1: First settings
6
© AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
26.11.12
Connection via power strip
If you must connect this device to a power strip, please keep the
following recommendation in mind:
Make sure the power strip does not have a noise filter or a surge protector, as these
features may impair communication signaling of the Powerline device sent over the
electric wiring, and its throughput or distance will be degraded.
Use a power strip with an AC cord that is as short as possible.
Do not connect the adaptor to a power strip that receives power from another power
strip.
Electrical interference
Certain electrical devices emit electrical noise. If this noise is spread over to the
electrical wiring in your home, it may interfere with the performance, speed, and
reliability of this device. For best results, we recommend connecting an electrical noise
filter to noise emitting appliances.
The following appliances are more likely to produce noise:
Battery chargers (including cell phone chargers)
Hair dryers
Power drills
Halogen light
Vacuum cleaner
Additionally, this product may interfere with the following appliance:
Lights or lamps which have a touch-sensitive on/off feature
Electrical wiring
This device sends data to and from each other over the existing electrical wiring of your
house. If two wall outlets are separated by a great distance of electrical wiring, these
devices may not communicate well with each other. For more information, refer to the
troubleshooting section.