AXING SPL 2-00 - Manual (Page 9)

Operation Instructions SPL 2-00/-01
Chapter 3: Powerline Network Security
26.11.12 © AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
9
3
Powerline Network Security
A Powerline network consists of two or more Powerline adapters using the same
network security key. Securing your network protects the information you send over the
Powerline network from unwanted access. If you do not set up security on your
network, anyone nearby with a Powerline network can potentially use his or her
connection to gain access to your network and information you send over the Internet.
This is especially relevant in settings such as apartment buildings, office buildings,
dorm rooms, and other populated areas.
There are two ways to secure your Powerline network.
• Use the Security/Reset button to automatically generate a random security key.
• Use the Powerline Utility to specify an security key for your Powerline network. If
you already have a Powerline network, you need to use the Powerline Utility
software (download for free http://www.axing.com/download/SPL-Utility_en.html).
To return the Powerline AV Ethernet Adapter to its factory default settings, press its
Security/Reset button for 10 second, then release.
3.1 Security/Reset Button Overview
The Security/Reset button allows you to set up a secure powerline connection with
other HomePlug AV compliant powerline devices which also support the Security
feature. No other powerline setting changes are required to connect.
You can use the Security/Reset button to:
• Set up a new powerline network
• Separate an existing powerline network into multiple networks
3.1.1 Group pairing
To set up a Powerline network with Security
You can connect a number of devices on a powerline network, but you can use the
Security/Reset button on only two devices at a time.
1. Place a powerline device close to another powerline device so you have time to set
up each one. After you set up the first powerline device, you have 120 seconds to
set up the second powerline device.
2. You can disconnect them from your computer or modem (or other networking
equipment) if you need to move them close to each other, but the powerline devices
need to be plugged into power outlets.