Recall dose data – Casella CEL CEL-424 User Manual
Page 7
Operation
Press
Display Shows
Comments
7. If Required
PLUS
To lock keys and display to
prevent unauthorised
tampering.
8. If Required
PLUS
To unlock keys and display
to restore normal operation.
9. Stop Run
Stop ? This command must be
confirmed.
10. Confirm Stop
The Run is now ended.
8.
Recall Dose Data
Measurement data is stored in the DOSE operating mode and is acces-
sed using the
key. Current data can be inspected while the instru-
ment is recording. When the instrument is stopped, with no data being
saved, stored data can be retrieved and displayed.
8.1
Review Data From Current Run
Operation
Press
Display Shows
Comments
1. Inspect Data
From Current
Run
This shows the dose value
accumulating during the
current run.
This value will be updated
while the run progresses.
2. Inspect
Further Data
From Current
Run
repeat
Data from Current Run
Display cycles through data
from current run.
Displays will be updated while
the run progresses.
8.2
Review Stored Data
Stored data is identified by date and measurement start time and up to
16 runs can be stored simultaneously before the memory is overwritten
by a "first-in/first-out" process.
Operation
Press
Display Shows
Comments
1. Enable Data
Recall
With the instrument stopped,
operation of
displays
the Start Date & Time for the
most recently stored run.
CEL-420/460 Getting Started - Page 59