Time and date, Scribed in, Section 8 – Casella CEL CEL24X User Manual
Page 14: If you do not wish
8. MEMORY AND TIME/DATE SETTINGS (CEL-242/246)
This screen only appears when the instrument is switched on and only on CEL-242 or
CEL-246 models.
Figure 10 Time and Date Screen
The memory status in Figure 10 (C) displays 100%, meaning the memory is full. No
more data can be stored. To delete the memory press the Left key (A) to access the
Memory Deletion Screen (Refer to
). Ensure any
measurements are downloaded via dB24 prior to deletion.
Figure 10 (D) shows the time and date currently set within the instrument. Press the
Right key (B) to access the Set Time and Date screen (Refer to
Note:
If no changes are require to the memory or time/date settings then do not
press any keys and the instrument will proceed to the measurement screen.
14