Set time and date, Switch off – Casella CEL CEL24X User Manual
Page 16
10. SET TIME AND DATE SCREEN CEL-242/246
This screen is accessed from the Time and Date screen described above.
When this screen is accessed (Refer to Figure 13) the HH (hours) will be highlighted.
Press Right key (B) to set the hour. Press Left key (A) to advance to the MM
(minutes). Press Right key (B) to set the minutes. Press Left key (A) to advance to
the SS (seconds). Press Right key (B) to set the seconds. Use keys (A and B) in the
same sequence to set the date.
When the time and date have been set press Left key (A) to return to the Time and
Date screen.
Figure 13 Set Time and Date
11. SWITCH OFF
When the required measurements have been taken, press and hold the Power Key,
refer to Figure 14 (A) for three seconds to switch OFF the instrument. A ‘door’ display
will be shown counting down 3, 2, 1.
Figure 14 Switch OFF
16