Casella CEL Software for Nomad (Standard Operation) - Manual (Page 8)

¤ Vapour pressure and Dew Point calculation, based upon
Temperature and Humidity
¤ Heating / Cooling Degree Day calculations based upon measured
temperature values and a user defined threshold
¤ Rolling averages over user selected time period
¤ Vectored rolling averages for wind direction
¤ Cross wind component calculation using wind speed, direction and
reference heading
The program loads a set of eight standard screen layouts (pages)
automatically. These pages can be user configured to suit your specific
requirements. Simple mouse controlled operations enable display elements
to be added, customised or deleted.
Data files created by the software employ a standard ASCII plain text
format allowing them to be incorporated into many commercial spreadsheet,
word processing or data base applications. The software can be supplied to
operate in network mode so that real time values can be accessed and
displayed by multiple users.
For additional information on using Online Pro, please refer to the
help available via the software help buttons.
These are the recommended steps for getting your measurement
arrangement started.
Install the software
Configure the software for your monitor systems
Load the configuration files from the
configuration disks supplied when
software and monitor system have been
supplied at the same time.
Refer to Part 2 for configuring your
software when changes have been made
to the arrangement, or new systems have
been added.
Specify the data required Select the measurements and information
you want to display
Set up display pages
Add real time display items
Operate the software Display real time data
View historic data.
Introduction ONLINE Pro Application Software for
Automatic Monitor Systems - Users Handbook
Page 8 of 68