CIRCUTOR CVM-NRG96 Series (Available until stocks) - Manual (Page 27)

CVM-NRG96
M9817250120-03-05A
27
1. Setting the communication parameters
Default settings (factory settings)
The display shows ”
m_n{=^_`{hi”
To select one of the two display options, just press the MAX key and the two
options will alternate.
m_n{=^_`{hi{
Personalized communication parameters.
m_n{=^_`{S_m{ Peripheral: 001
Transmission speed: 9,600 bps
Data bits: 8
Parity No
Stop bits 1
Once the required option is selected, press the
key to enter the data and
access the following setting step.
If the selected option is “
m_n{=^_`{S_m” the configuration screens refer
to: peripheral number, speed, data bits, parity and stop bits, are omitted
moving on to the last screen in the communication menu.
If the selected option is “
m_n{=^_`{hi”:
Peripheral number
The display shows ” m_n{hj_l{**+”.
{M?n
{hj_l
{{**+
{m_n
{=^_`
{hi
{M_n
{=^_`
{s_m