CIRCUTOR MDC-4 - Manual (Page 14)

The graph in Figure 6 shows the unit's response:
Figure 6: Graph with the response of the MDC-4
4.2.- PARAMETERS
The unit displays the electrical parameters shown in Table 3 .
Table 3: MDC-4 measuring parameters�
Measuring parameter Units
Phases
L1-L2-L3
Total
III
Phase-neutral voltage V 
Phase-phase voltage V 
Current A  
Active power W  
Reactive power var  
Apparent power VA 
Cos φ φ  
Active Energy kW·h 
Current Date and Time -
Maximum demand parameters Units
Contracted power W / VA / mA
Instantaneous maximum demand W / VA / mA
Status of the output relays -
Maximum demand maximum value W / VA/ mA
The % of time that each output relay has been dis-
connected
%
14
MDC-4
Instruction Manual