Instantaneous value display – CIRCUTOR CEM-C10 series User Manual
Page 17
Advertising
4.5.-
INSTANTANEOUS VALUE DISPLAY
To open the screens where the instantaneous value are viewed, long press the
key on the
display in standby mode.
Figure 8: Instantaneous Value main screen�
Long press the
key to open the different screens.
Short press the key to browse the different screens (see
The standby mode is activated again when no key is pressed for 60 seconds.
Table 7: Instantaneous value screens
Screen
Parameters
Voltage
Current
Active power
Reactive power
Apparent power
Power factor
17
Instruction Manual
CEM-C10
Advertising