CIRCUTOR CEM-C10 series - Manual (Page 28)

4.8.-
MANUFACTURER INFORMATION SCREEN
Long press the key in the standby mode screen to open these display screens. Short press
the key to display the manufacturer information home screen, Figure 12 :
Figure 12: Manufacturer information home screen�
Long press the key to open the different screens.
Short press the key to browse the different screens (see Table 9 ).
The standby mode is activated again when no key is pressed for 60 seconds.
Table 9: Manufacturer information screens�
Screen Parameters
Unit model
Version
Communications protocol (1)
Communications protocol
version (1)
Active energy with resolution in Wh
Reactive energy with resolution varh
28
CEM-C10
Instruction Manual