Partial energy display – CIRCUTOR CEM-C10 series User Manual
Page 18
Table 7 ( Continuation ) : Instantaneous value screens
Screen
Parameters
Hours of operation from manufacture
4.6.-
PARTIAL ENERGY DISPLAY
NB: The partial energy display menu is only displayed if the partial energy display option has
been selected in the setup menu (
see
Long press the
key in the standby mode screen to open these display screens. Short press
the key to display the partial energy main screen,
:
Figure 9: Partial energy main screen�
Long press the
key to open the different screens.
Short press the key to browse the different screens (see
The
PAR icon on the screen indicates that you are viewing the partial energies.
The standby mode is activated again when no key is pressed for 60 seconds.
Table 8:Partial energy screens�
Screen
Parameters
Partial imported active energy.
Partial exported active energy.
Only displayed in the 4-quadrant version.
Partial reactive energy, quadrant 1 (L+).
(1)
18
CEM-C10
Instruction Manual