CIRCUTOR CEM-C10 series - Manual (Page 29)

Table 9 ( Configuration ) : Manufacturer information screens�
Screen Parameters
32-bit CRC (high and low-order)
(1) The screen is displayed if there is a CEM M-RS485 (communications interface for units of the CEM
family) connected to the unit.
4.9.-
IMPULSE OUTPUT
The energy meter has optocoupler type outputs capable of generating impulses at a previously
programmed rate. (See “4.7.1. Impulse output weight” and ”4.7.2. Impulse output type” )
4.10.-
INFRARED COMMUNICATIONS PORT.
In all versions, the unit has a serial optical communications port, in compliance with the UNE
EN 62056-21:2003 Standard.
29 Instruction Manual
CEM-C10