CIRCUTOR computer MAX f Series User Manual
Page 17
Advertising
M066B01-03-15A
computer MAX 6f 12Vdc
- 16 -
6.2
Diagram for navigating through the menus.
Table 6-1.- Setup Menu navigation diagram
Parameter
selection
Screens
Refer to
Section
Long
keystroke for
entering
cos
ϕ
objective
Home screen
C/K
Program
Delays
No. of
stages
CT phase
Primary of
the CT
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
!!!!
IMPORTANT:
Once in the setup menu, if no buttons are pressed during three minutes, the unit exits the adjustment
mode and changes to the normal mode without saving the configured parameters. To exit the setup
menu of the unit and save the parameters, it is necessary to press and hold button
for more
than 1 sec..
Advertising