CUE CueSiteManager Programmers - Manual (Page 14)

14
Cue Site Manager / Programmer’s Manual / Project Configuration
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
Step 7
Import module CSMOverviewInterface_x.xx.cvcm to Operator Console CUEunit, section Modules.
Step 8
Set the properties of window CSMOverviewUI1. Properties are described in the chapter CSMOverviewUI
(window) / Properties.
Step 9
If you want to use more Operator Consoles, insert appropriate CUEunits to your project and repeat steps 4 to
6 for each Operator Console.
Step 10
Upload your project to all units using Final button.
Step 11
Run Central Station and minimum one Operator Console application in real CUEunit and provide Central
Station Configuration described in following section.