CUE CueSiteManager Programmers - Manual (Page 15)

15
Cue Site Manager / Programmer’s Manual / Central Station Configuration
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
Central Station Configuration
Step 1
Run Central Station and minimum one Operator
Console.
Step 2
Click settings button in right bottom corner.
Step 3
Use Common Configuration window for configuration.
Parameter configuraton windows are activated by
appropriate button in column Value.
Step 4 - Site Addresses
Click button Add Site.
Onscreen keyboard is displayed and you can type site
URL address. Press Enter button on the keyboard to
confirm.
Another onscreen keyboard is displayed and you can
type site port. Press Enter button on the keyboard to
confirm. Default port is 8020 and it is used in case
you did type nothing. For more details see chapter
Network Configuration.
If password is applied for communication with the site,
touch the password cell and edit it.
Repeat these steps for each monitored site.
Notes
▪ All filled cells can be edited by touching the cell.
▪ Button Delete can be used to delete site.