CUE CueSiteManager Programmers - Manual (Page 3)

3
Cue Site Manager / Programmer’s Manual / Introduction
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
Introduction
Overview
Cue Site Manager (CSM) is a software solution for IT staff and asset management allowing to remotely
monitor and control boardrooms, offices, auditoriums, classrooms, private homes, flats, etc. and their
associated controlled devices. Each site can be identified by name, group and location.
Monitor
The system monitors any system attribute - lights, room temperature, volume, projector lamp life and
power, etc. For each attribute the threshold value and condition can be defined and if this condition is
reached one of the following actions will be triggered
▪ Help request informs administrator that someone on site needs a help. Typically this action can be
triggered using Help button on the touch panel.
▪ Maintenance request informs administrator that some site needs a maintenance. For example projector
air filter needs to be cleaned.
▪ Service request informs administrator that some service is required. For example projector lamp needs
to be replaced.
▪ Security alert informs administrator about some security issue. For example projector lost network
connectivity. It can indicate, that projector has been stolen.
All actions described above can be customized to perform the following tasks
▪ Display on administrator application
▪ Send information to predefined e-mail addresses
▪ Write to log file
Control
Each site has set of predefined commands which can be executed by administrator. For example
administrator can switch on / off the projector, set room preset or light scene, etc.
Application Diagram
Central Station / Operator Console
Monitored Site 1
Monitored Site 2
Monitored Site n
Network