CUE Design Director Script Language - Manual (Page 32)

Reference Manual Design Director Script Language
www.cuesystem.com
Page 32 of 94
Method Parameters Description
Hide Closes the object. If the operation cannot be performed (e.g. closing of the
last opened page, closing of object from which the modal window is
launched) then an error will be generated.
PosMe2Parent Param x uint
Param y uint Converts the entered coordinates x, y relative to the object to coordinate
relative to the parent object. If the father of the object is not defined (the
value of the property Father is NoObject) then the coordinates remain the
same.
PosParent2Me Param x uint
Param y uint Converts the entered coordinates x, y relative to the parent object to
relative coordinate directly to the object. If the father of the object is not
defined (the value of the property Father is NoObject) then the
coordinates remain the same.
PosParent2Top Param x uint
Param y uint
Converts the entered coordinates x, y relative to the parent object to
relative coordinate to the top object (i.e. relative to the window or the
page) If the father of the object is not defined (the value of the property
Father is NoObject) then the coordinates relative to the top object remain
the same as the coordinates relative to father of the object.
PosScreen2Top Param x uint
Param y uint Converts the entered coordinates x, y relative to the entire screen to
coordinate relative to the top object (i.e. relative to the window or the
page)
PosTop2Parent Param x uint
Param y uint Converts the entered coordinates x, y relative to the top object (i.e. relative
to the window or the page) to coordinates relative to the parent of the
object. If the father of the object is not defined (the value of the property
Father is NoObject) then the coordinates relative to object remain the
same as the coordinate relative to the father of the object.
PosTop2Screen Param x uint
Param y uint
Converts the entered coordinates x, y relative to the top object (i.e. relative
to a window or page) to coordinates relative to the entire screen.
Show Opens the object. In case the object has been already opened (speaking
about a window), the method will move it above all other. In case the
object would not be able to be opened – e.g. there is some temporarily
modal window opened, then the method will generate an error.
Simultaneously during the opening process the OnShow event of the
opening object is called. Note: speaking about the error handling process,
for the Show method call within the framework of the method (before
control returns back from it) calls the event – for the event handling
OnErrorResumeNext is set and Err object is reset. Once the event is
finished, the eventual error (its number) is assigned to Err object and the
code continues. In case of the modal window opening, the code will not
wait. I.e. the window opening is performed and it is further continued.