CUE Design Director Script Language - Manual (Page 82)

Reference Manual Design Director Script Language
www.cuesystem.com
Page 82 of 94
Property Type Description
Type uint It is the way how the gauge will be displayed. Values 0..from left to right,
1..from right to left, 2..from down to up, 3..from up to down. To insert
different values is not checked, what will appear is not defined.
Value uint It is the actual object value. According to the value the object is
displayed in a different way – e.g. button, bargraph. According to value
the message and tab are defined, what message resp. tab page will be
displayed. The value is default.
Visible uint When the value is a zero, the object is neither drawn nor it gets
information about the user’s touches on the panel (The events are not
generated) On the other hand when the value is other than the zero, the
object is drawn as well it receives events.
Width uint It is the total width of the object. The property cannot be changed for the
page.
X uint The X coordinate position of the object within the area of its parent.
Y uint The Y coordinate position of the object with the area of its parent.
Z uint The Z coordinate position of the object within the area of its parent that
means it determines the overlapping of the objects among each other. In
case two objects will have the same coordinate Z, the resulting status on
the screen is not explicitly defined. For the top object (that is a window or
a page), the coordinate sets position on the screen among other top
objects. For these objects the property cannot be changed, only read.