CUE Design Director Script Language - Manual (Page 70)

Reference Manual Design Director Script Language
www.cuesystem.com
Page 70 of 94
Method Parameters Description
Hide Closes the object. If the operation cannot be performed (e.g. closing of the
last opened page, closing of object from which the modal window is
launched) then an error will be generated.
PosMe2Parent Param x uint
Param y uint Converts the entered coordinates x, y relative to the object to coordinate
relative to the parent object. If the father of the object is not defined (the
value of the property Father is NoObject) then the coordinates remain the
same.
PosParent2Me Param x uint
Param y uint Converts the entered coordinates x, y relative to the parent object to relative
coordinate directly to the object. If the father of the object is not defined (the
value of the property Father is NoObject) then the coordinates remain the
same.
PosParent2Top Param x uint
Param y uint Converts the entered coordinates x, y relative to the parent object to relative
coordinate to the top object (i.e. relative to the window or the page) If the
father of the object is not defined (the value of the property Father is
NoObject) then the coordinates relative to the top object remain the same
as the coordinates relative to father of the object.
PosScreen2Top Param x uint
Param y uint Converts the entered coordinates x, y relative to the entire screen to
coordinate relative to the top object (i.e. relative to the window or the page)
PosTop2Parent Param x uint
Param y uint Converts the entered coordinates x, y relative to the top object (i.e. relative
to the window or the page) to coordinates relative to the parent of the object.
If the father of the object is not defined (the value of the property Father is
NoObject) then the coordinates relative to object remain the same as the
coordinate relative to the father of the object.
PosTop2Screen Param x uint
Param y uint Converts the entered coordinates x, y relative to the top object (i.e. relative
to a window or page) to coordinates relative to the entire screen.
Show Opens the object. In case the object has been already opened (speaking
about a window), the method will move it above all other. In case the object
would not be able to be opened – e.g. there is some temporarily modal
window opened, then the method will generate an error. Simultaneously
during the opening process the OnShow event of the opening object is
called. Note: speaking about the error handling process, for the Show
method call within the framework of the method (before control returns back
from it) calls the event – for the event handling OnErrorResumeNext is set
and Err object is reset. Once the event is finished, the eventual error (its
number) is assigned to Err object and the code continues. In case of the
modal window opening, the code will not wait. I.e. the window opening is
performed and it is further continued.