CUE Design Director Script Language - Manual (Page 44)

Reference Manual Design Director Script Language
www.cuesystem.com
Page 44 of 94
Event Parameters Description
OnSetBitmap ParamByVal Prev BitmapObject The event is called immediately after when someone changes
the Bitmap object property. The event is dedicated i.e. for the
change of the object size based on the picture size.
OnUp ParamByVal Prev uint
ParamByVal Same uin
Param Propagate uint
ParamByVal X uint
ParamByVal Y uint The event occurs at the moment when the user releases his
finger off the screen. This occurs before OnClick, but after
OnRelease. This occurs at the object where the finger has
been releases that means it does not necessarily have to be
the object from which the finger has been put. The parameters
are similar to OnRelease i.e. the first parameter gives the value
of the previous object (it is a value after a contingent run of
OnRelease event). The second parameter informs whether the
finger had been laid here and the third parameter gives
whether the event is sent further to the object physically lying
lower on the screen. The last two parameters give the position
where the user has performed the action. The position is
relative to the object.
Method Parameters Description
PosMe2Parent Param x uint
Param y uint Converts the entered coordinates x, y relative to the object to
coordinate relative to the parent object. If the father of the
object is not defined (the value of the property Father is
NoObject) then the coordinates remain the same.
PosParent2Me Param x uint
Param y uint Converts the entered coordinates x, y relative to the parent
object to relative coordinate directly to the object. If the father of
the object is not defined (the value of the property Father is
NoObject) then the coordinates remain the same.
PosParent2Top Param x uint
Param y uint Converts the entered coordinates x, y relative to the parent
object to relative coordinate to the top object (i.e. relative to the
window or the page) If the father of the object is not defined (the
value of the property Father is NoObject) then the coordinates
relative to the top object remain the same as the coordinates
relative to father of the object.
PosScreen2Top Param x uint
Param y uint Converts the entered coordinates x, y relative to the entire
screen to coordinate relative to the top object (i.e. relative to the
window or the page)
PosTop2Parent Param x uint
Param y uint Converts the entered coordinates x, y relative to the top object
(i.e. relative to the window or the page) to coordinates relative
to the parent of the object. If the father of the object is not
defined (the value of the property Father is NoObject) then the
coordinates relative to object remain the same as the
coordinate relative to the father of the object.
PosTop2Screen Param x uint
Param y uint Converts the entered coordinates x, y relative to the top object
(i.e. relative to a window or page) to coordinates relative to the
entire screen.