CUE ipCUE User Manual
Page 35
10. Factory Default Settings and
Reset / System Default Button
Every controller shipped from factory is set according to table bellow, Factory Default column.
The button Reset / System Default (formerly labeled Factory Default or F. Default) carries two functions
1. When pressed shortly (< 2 seconds) the reset of the unit is performed followed by operating system
boot taking approx. 15 seconds.
2. When pressed longer (until the CPU LED indicator will flash three times shortly to confirm), the system
default function is performed according to table bellow, System Default column. The main purpose of
this functionality is to regain connection to controller with lost password or unknown IP settings.
Factory Default
System Default
Configuration
Identification
Name
Empty
Not changed
IP settings
Host name
Empty
Not changed
IP address
192.168.1.127
192.168.1.127
Subnet mask
255.255.255.0
255.255.255.0
Default gateway
192.168.1.1
192.168.1.1
DNS
Primary DNS server
Empty
Not changed
Secondary DNS server
Empty
Not changed
Date and time
Date and Time
Day, month, year
Real
Not changed
Hour, minute, second
Real
Not changed
Time zone
(GMT+1:00 CET/CEST
Belgrade, ..., Prague)
Not changed
Internet clock
Use Internet clock
Not
Not changed
Primary NTP server
Empty
Not changed
Secondary NTP server
Empty
Not changed
Applications
Empty
Not changed
File storage
Empty
Not changed
System
Firmware
Current version
Not changed
Password
Empty
Empty
User Manual ipCUE Controllers
Page 35 of 52