Ip settings – CUE ipCUE User Manual
Page 38
IP Settings
This page is used for establishing the communication parameters for your ipCUE. The ipCUE uses standard
internet protocol (IP) communication parameters. Certain parameters can be reset by the user. On start up, this
page will display the ipCUE’s given Physical address (MAC), Current IP address. Carefully note this
addressing information (and any changes you elect to make to the IP address, subnet mask, or default
gateway). This information must be entered into the CUE System Director® program written for your specific
application. For control systems with more than one ipCUE controllers, a unique IP address must be given to
each ipCUE.
Some control systems are “stand alone” and not part of a larger network. For such “stand alone” systems, the
Host name is optional. However, for control systems that are connected to a larger network, please obtain the
Host name from the network administrator, and enter it into the corresponding box. DHCP is not supported in
this release. Be sure to click the Apply button for any changes to the IP settings to become effective!
User Manual ipCUE Controllers
Page 38 of 52