Holland Electronics HDTV-ST2 - Manual (Page 9)

8
Front Panel Buttons and LEDs
Power
Press to turn the Receiver ON or OFF.
NOTE: If a loss of AC power occurs while the receiver is turned on then the receiver will automatically turn
on and resume service on the same channel after power is restored.
Right arrow button
Move the cursor or field to the right. Select one channel higher by pressing this button.
Left arrow button
Move the cursor or field to the left. Select one channel lower by pressing this button.
Up arrow button
Move the cursor or field upward. Increase volume by pressing this button.
Down arrow button
Move the cursor or field downward. Decrease volume by pressing this button.
Menu
Displays the main menu on the screen, and exits the menu
Select
It can select highlighted options or values in sub-menus.
LED Display
Two LED displays. One is for showing power on/off, the other one is for showing signal process status.