KBC Networks 3U Chassis Transceiver User Manual
Page 13
Manual-FD＿BSeries-Rev1008.pdf Page 9 of 34
Copyright © KBC Networks Ltd.
Connectors:
FIB: Fiber Optic.
V,V1-V4: Video Input, BNC or DB9. DB9 pins assignment as below:
VIDEO1 Channel 1 Video, input
VIDEO2 Channel 2 Video, input
VIDEO3 Channel 3 Video, input
VIDEO4 Channel 4 Video, input
GND Common Ground of Channel 1~4 Video
DATA: RS232/RS422/2 wires RS485 or 4 wires RS485 compatible. Terminal pins
assignment and DIP Switch setting refer to Table 1 and Table2 in section 5. Data
Block Connections and DIP Switch Setting.
LEDs Definition:
POWER: Power Supply. On if power input is OK.
Off if no power present.
FIB: Fiber Link.
Off if link continuity is good.
On if no link continuity.
V1- V4:
;
Channel 1-4 Video. On if video input is OK.
Off if no video present.
D1: RS232/RS422/ 4 wires RS485 Transmit Data,
:
Flash if data being transmitted.
Off if no data being transmitted.
2 wires RS485 Transmit/ Receive Data, Flash if there is activity.