2 2 fibers – KBC Networks 3U Chassis Transceiver User Manual
Page 14
Manual-FD_BSeries-Rev1008.pdf Page 10 of 34
Copyright © KBC Networks Ltd.
D2: RS232/RS422/ 4 wires RS485 Receive Data, Flash if data being received.
Off if no data being received.
2 wires RS485 Transmit/ Receive Data, Not used.
3.4.2 2 Fibers
Connectors:
FIBa: Channel 1 Fiber Optic.
FIBb: Channel 2 Fiber Optic.
Va: Channel 1 Video input, C3.
Vb: Channel 2 Video input, C3.
Da: Channel1 Data, RS232/RS422/2 wires RS485 or 4 wires RS485 compatible.
Terminal pins assignment and DIP Switch setting refer to Table 1 and Table2
in section 5. Data Block Connections and DIP Switch Setting.
Db: Channel2 Data, RS232/RS422/2 wires RS485 or 4 wires RS485 compatible.
Terminal pins assignment and DIP Switch setting refer to Table 1 and Table2
in section 5. Data Block Connections and DIP Switch Setting.
LEDs Definition:
POWER: Power Supply. On if power input is OK.
Off if no power present.