KBC Networks 3U Chassis Transceiver - Manual (Page 5)

Manual-FD＿BSeries-Rev1008.pdf Page 1 of 34 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
0. Product Type
Configuration
1. Overview
1.1 Introduction
The 3U chassis series transceiver is designed using advanced ASIC and high-speed DSP
technologies. This series employs multiplexing techniques to transmit and receive 1-4
channel of Video, 1-2 channel simplex or bi-directional Data over a single-mode or
multi-mode optical fiber in all digital signaling with no compression; making it ideal for
applications where input signal integrity and quality must be maintained and no loss should
be induced. Because the series utilizes all-digital, non-compression technology, it is able to
transmit signals without distortion; whereas the analog technology inherently noisy, low
quality, long term instability and susceptible to electromagnetically and environmental
interference. This series accepts a variety of video inputs, such as analog or digital video
recorder, DVD/VCD, digital camera, and CCTV . PAL, NTSC and SECAM standards are
supported. It supports standard RS232/RS422/2 wires RS485 or 4 wires RS485 data
pan-tilt-zoom control signaling. Plug-and-Play design ensures ease of installation and no
electrical or optical adjustment is required. LED indicators are provided for showing
operating status.
Fiber 1 2 3 4
1310nm 1310nm/1550nm
SM MM
ST/PC SC/PC FC/PC
Video 1 2 3 4
BNC DB9 C3
8bit 10bit
Data RS422 RS232/RS422/RS485
Return directional Bi-directional
Contact Closure Bi-directional Forward directional