Monroe Electronics R190A - Manual (Page 20)

Section 2 Remote Control
18
Relay Configuration
From the main menu, click the Relay 1 tab to setup how the relay 1 section of the
control page will be displayed.
Main Header - If desired, enter text to be displayed for the main header on the
control page.
Auto Refresh Page & Duration – Controls whether or not to continuously refresh
the relay control page to update the relay status. The duration sets the time the
page is held before it is refreshed. This time can be from 1 to 32 seconds.
Relay Description - If desired, enter text to be displayed in the relay name box on
the control page.
Display Relay Status – Click the yes or no radio button to turn on or off updating
relay 1 status.
Status ON Colors – Select the desired color to be displayed when the relay is
turned on.
Status ON Text – Enter the text to be displayed when the relay is turned on.
Status OFF Color & Text – Enter colors and text to be displayed when the relay is
turned off.
ON/OFF Buttons –
Button 1& 2 Labels – Enter the desired text to be displayed on the relay actuator
buttons.
Pulse Button – Click the corresponding radio button to turn on or off the display of
the pulse button.
Pulse Button Label – Enter the desired text for the pulse button.
Pulse Duration – Enter the time desired for the relay contacts to be momentarily
closed. Time can be from 0.1 seconds to 86,400 seconds (1 day).