TelVue AdCaster User Manual
Page 15
Figure 3.1: The splice server config page will allow you to add, remove, and
edit individual splice server configurations.
cannot handle we provided a large set of configuration options. If at anytime
you need a hint about what each configuration option means you can click on
the question mark (?) symbol next to the name of the configuration parameter.
To begin setting up splicer channels you will want to click on the “Config”
tab and then on the “Splice Channels” tab on the left side pane. This will
present you with another table view like in figure 3.2. Pressing the plus (+)
button will bring you to the channel configuration page like the one in figure
3.5.
It is important that you consult the manual for your splicer because the con-
figuration for each splicer is very different. the “Name”, “Version”, “Chassis”,
“Card”, and “Port” are unique for each splicer make and model.
14