TelVue AdCaster - Manual (Page 7)

screen would look like. Once you have the IP address of the AdCaster unit you
can access the web application with a browser.
Figure 2.2: The AdCaster login page
2.2 Using the front panel LCD
If you do not have DHCP set up on the control network, you can set the IP
address using the front panel LCD. To begin configuring the network settings
on the server, navigate to the configuration menu shown in figure 2.3 using the
up or down arrow key.
Figure 2.3: The network configuration menu screen
Press enter to access the configuration sub-menu. If there are more then
one network cables attached to the system the first menu will ask which device
should be configured (figure 2.4). You will want to select eth0.
After selecting eth0 and pressing the enter key, you will be asked to select
6