2 camera directions, 11 speed limit warning, 12 tmc (traffic message channel) – Tview D65TSG User Manual

Page 29

Advertising
background image


29

Symbol Type

Description

identify your car and record the exact time you pass them. They use the
difference between the two points in time to calculate your average
speed.
Nav N Go iGO 8 warns you when you approach one of these speed
cameras, but as you pass by, the warning stays on, and your average
speed is measured until you reach another speed camera of this type. If
your average speed exceeds the speed limit between the two speed
cameras, you receive the same special warning sound as with the other
speed camera types.
In the rare case Nav N Go iGO 8 cannot register the moment you pass
the second speed camera (for example, it is placed at the exit of a
tunnel where GPS position is not yet available) the warning continues.
Just tap the speed camera symbol displayed on the screen to stop the
warning.

Red
light

These cameras check if you obey traffic lights. The warning is similar to
mobile speed cameras: as there is no speed limit given, only the
proximity is announced.

2.5.10.2 Camera directions

A speed camera can measure the speed of one direction of the traffic, both directions, or
even several directions in an intersection, when they are mounted on a rotating base. The
same directions apply to red light cameras. Nav N Go iGO 8 warns you only if you drive in a
measured or possibly measured direction. The measured direction of the camera appears
with the following symbols:

Symbol

Description

The camera checks the speed of the direction into which you are driving.

The camera checks the speed of the opposite driving direction.

The camera checks the speed in both directions on the road.

The camera can check the speed in any direction.

2.5.11 Speed limit warning

Maps sometimes contain information about the speed limits of the road segments. This
information may not be available for your region (ask your local dealer) or may not be fully
correct for all roads on the map.
You can configure Nav N Go iGO 8 to warn you if you exceed the current limit. Tap the

following buttons:

,

,

,

.

When you exceed the speed limit, the following happens:

Visible Warning: A symbol with the speed limit appears in the corner of the map (for

example:

).

Advertising