TVLogic VFM-056W - Manual (Page 21)

Vie
wfinder M
onit
or 21
[1] Pixel to Pixel
* VFM-056W-N / VFM-056WP-N monitors provide
pixel count info using Pixel to Pixel mode.
* Select [Scan] mode in the OSD menu by
pressing the [
●
FUNC.
●
■■■■■
FUNC. SEL.] button
to activate the[Pixel To Pixel] mode.
* After activation of [Pixel To Pixel] mode, use the
Knob to move the position.
# Pixel to Pixel mode is not available for Graphic
Signal input.
# Pixel to Pixel mode works for SD signal, when
the input resolution is lower than the monitors
native resolution.
• Positions in HD Signal 1080i/1080p mode
<CENTER>
UP
DOWN
<RIGHT TOP>
<MID BOTTOM>
<LEFT TOP>
<RIGHT MID>
<LEFT BOTTOM>
<MID TOP>
<RIGHT BOTTOM>
<LEFT MID>
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
<CENTER>
UP
DOWN
<LEFT TOP> <RIGHT TOP>
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
<RIGHT BOTTOM> <LEFT BOTTOM>
UP
DOWN
Input Action Available Modes
HD
720p
[Scroll UP]
(Clockwise)
Center -> Left Top -> Right Top
-> Right Bottom -> left Bottom
-> Center -> …
[Scroll
DOWN]
(Counter
clockwise)
Center -> Left Bottom -> Right
Bottom -> Right Top -> Left
Top -> Center -> ….
8. Other Functions