WaveWare Call Manager - Manual (Page 31)

STEP 12 – Assign Pagers to Stations
Click on the “ Assign Pagers to Stations ” Button , as shown in Step 11. See Fig. 48
Fig. 48
In this Step, you are Associating Pagers to Stations, so that when a Call Event occurs for a Particular Room, only
the Pagers Assigned to the Station Responsible for that Room will be Paged.
The “ Stations ” List should be Populated with the Stations Previously Setup in Step 11 ( Page 30 ).
The “ All Pagers ” List should be Populated with the Recipients Previously Setup in Step 6 ( Page 19 ).
See Fig. 49
Fig. 49
Add a Pager to a Station
Highlight the “ Station ” Name and Click on a Pager in the “ All Pagers ” List to add it to the “ Station List ”.
The Pager will be shown on the “ Pagers in Station ” List.
Use this same Method to “ Remove ” a Pager from the Station List.
See Fig. 50
Fig. 50
Click “ OK ” When Finished.
Step 13 is Next
31