Adtec digital MAS & iptvManage - Manual (Page 35)

33 Chapter 7 - Managing Customers
Configuring Decoder Locations:
After a customer has been created, you can also create customer
locations for use with a set top box. In the customer list, click on the Decoder
Location link for the customer. From this page, you will be able to select a
set top from the pool of available set tops and assign it to a location in the
customers home. Each set top in a customer home has it’s own location.
Once these locations have been assigned, you can add packages and channels
and assign VOD rules for these locations. In addition to the program settings
for these locations, you can set parental passwords and create a favorite
channels list per location. Each customer also has a customer pin per a
location. This customer pin is used to authorize a specific set top for a specific
location.
Assigning a Decoder to a Location
At the top of that page, select the set top box by it’s serial number, and then
select the location for this set top from the location drop down list. Click on
the Assign to Location’ button and you will see the assignment immediately in
the list below.
Settings
You can change the customer pin, color of the edjeGuide set top box
application and parental password.
Programming
To add programming select the Programming link for the decoder location.
Make your programming assignments and click Save. You will be returned to
the decoder locations list for your customer.
Setting VOD Rules
You can also select the VOD rules for this customer by clicking on the VOD
Rules link .
Configuring edjePlayer Accounts:
Configuration of edjePlayer accounts can be done by clicking the edjePlayer
account link for the customer. By default the primary customer is the account
holder. The primary customer can have as many sub customers as allowed
by the system. Each sub customer has their own programming, favorites and
VOD Rules.
By default, sub customers inherit the primary customers programming.