AGI Security SYS-4HNVR304 Manual - Manual (Page 15)

USER INTERFACE
9
3. USER INTERFACE
3.1 Local Access
Connect your USB mouse to one of the USB ports on the front panel, and check if there’s a mouse icon ( ) on the
screen, indicating the USB mouse is detected properly.
Move your mouse to enter the password with the password keypad. The default user name and password are both
“admin”. The status will be changed from
(key lock) to (unlock).
Note: You may configure four different user levels to have different access privileges in “SYSTEM” 
“ACCOUNT”. For details, please refer to “4.3 User Level Creation” at page 12.
Password Input
3.2 Local
3.2.1 Device Status
Note: The functions shown may vary based on the model or the access user level you use.
Key lock Key unlock
Channel lock Channel unlock
USB flash drive / device connected No USB device connected
Timer record on Timer record off
Overwrite on
Overwrite off
Sequence mode on Sequence mode off
PTZ mode on PTZ mode off
Backup event queued and USB flash drive needed USB flash drive full
CPU loading
Network Status:
(WAN) Internet connected (WAN) Internet disconnected
(WAN) Local connection
(LAN) Auto mode –Mbit/s
(LAN) Auto mode – Gbit/s
(LAN) DHCP / Static IP mode (LAN) Camera disconnected
3.2.2 Channel Status
Note: The functions shown may vary based on the model or the access user level you use.
Auto search on Auto search off
Original size Fit to screen
Live audio on Audio off Audio playback on Audio playback off
Recording PTZ control Alarm event Motion event
Live information Playback information
Digital zoom Channel Playback
Quick camera control