AGI Security SYS-4HNVR304 Manual - Manual (Page 35)

MAIN MENU
29
5.4.6 DISPLAY
ADVANCED CONFIG
CONNECTION FULL SCREEN DURATION 03 
CAMERA QUAD SCREEN DURATION (For selected models only) 03 
DETECTION DISPLAY COVERT ON
ALERT HDD DISPLAY MODE REMAINGING SIZE 
NETWORK BRIGHTNESS 128
DISPLAY CONTRAST 128
RECORD SATURATION 128
NOTIFY CH COVERT IN SUPERVISOR MODE ON
EXIT
1) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
2) QUAD SCREEN DURATION
(For selected models only)
Select the quad screen dwell duration time in second (03 / 05 / 10 / 15).
3) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” when covert recording is activated in “CAMERA”.
4) HDD DISPLAY MODE
Select “REMAINING SIZE” to show the remaining HDD capacity for recording in GB, or “REMAINING TIME”
to show the remaining recording time.
5) BRIGHTNESS / CONTRAST / SATURATION
Click the current value to manually adjust the brightness/contrast/saturation/ of the screen.
5.4.7 RECORD
Note: Please DO NOT change the date or time of your recorder after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all hard disk data, and start recording again.
ADVANCED CONFIG
CONNECTION MANUAL RECORD OFF
CAMERA EVENT RECORD ON
DETECTION TIMER RECORD OFF
ALERT PRE-ALARM RECORD ON
NETWORK OVERWRITE ON
DISPLAY KEEP DATA LIMIT (DAYS) OFF
RECORD RECORD CONFIG SETUP
NOTIFY
EXIT
1) MANUAL RECORD
Set the manual recording function on / off.
2) EVENT RECORD
Set the event recording function on / off.
3) TIMER RECORD
Set the timer recording function on / off.