AGI Security SYS-4HNVR304 Manual - Manual (Page 37)

MAIN MENU
31
PUSH MESSAGE (for selected models only)
Before using this function, make sure:
 You have iPhone ® , iPad ® , or Android™ mobile phone or tablet.
 You have subscribed the mobile network service from your mobile service provider.
 The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “APPENDIX 4 MOBILE SURVEILLANCE
VIA EAGLEEYES” at page 37.
 You have configured EagleEyes to access this recorder, and Push Video is enabled. For details, please refer to “APPENDIX 5 SET
PUSH VIDEO” at page 38.
You’ll get a text message telling you the occurrence of selected system event(s).
ADVANCED CONFIG
CONNECTION PUSH VIDEO PUSH MESSAGE MESSAGE MAIL VIDEO MAIL
CAMERA ACTION ON
DETECTION EVENT  ALL
ALERT  VIDEO LOSS
NETWORK  HDD FULL
DISPLAY  POWER ON
RECORD  HDD (CLEAR / NO HDD / OVER TEMPERATURE)
NOTIFY  NET LOGIN
 KEY UNLOCK
 NETWORK
 UPS
 SYSTEM ABNORMAL
EXIT
Step1: Switch “ACTION” to “ON”.
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable “Push Message” in EagleEyes on your mobile device, and try to trigger an alarm event to see if
you’ll get Push Message.
MESSAGE MAIL
Note: For E-mail notifications, make sure you have configured an E-mail account in “NETWORK” 
“E-MAIL” to send the notifications.
Enable this function in “ACTION”, select the event type(s) you want to send notifications in “EVENT”, and add
the E-mail address(es) to which you want to send notifications in “RECEIVER”.
You’ll get an E-mail telling you the occurrence of your selected event(s).
ADVANCED CONFIG
CONNECTION PUSH VIDEO PUSH MESSAGE MESSAGE MAIL VIDEO MAIL
CAMERA ACTION ON
DETECTION EVENT  ALL
ALERT  VIDEO LOSS
NETWORK  HDD FULL
DISPLAY  POWER ON
RECORD  HDD (CLEAR / NO HDD / OVER TEMPERATURE)
NOTIFY  NET LOGIN
 KEY UNLOCK
 NETWORK
 UPS
 SYSTEM ABNORMAL
RECEIVER SETUP
EXIT