Technical specifications – Analog Way Studio Scan XTD620 User Manual
Page 14
Chapter 8 : TECHNICAL SPECIFICATIONS STUDIO SCAN XTD 620
PAGE 14
Chapter 8 : TECHNICAL SPECIFICATIONS
• DISPLAY
Graphic to Video:
Resolution: up to 1280 x 1024.
Line frequency: up to 85 kHz.
THE RECOGNITION OF THE DIFFERENT DISPLAY MODE IS AUTOMATIC AND IMMEDIATE.
Graphic Monitoring:
The WORKSTATION / PC / MAC monitor is available without any troubles.
Scanning:
AUTO SCAN MODE.
Colors:
16 Millions (3 RGB Memory Plane).
Anti-Flicker:
8 levels.
Graphic Format:
COMPUTER into VIDEO translation “Full screen” TV.
Image Freeze:
Synchronized in frame (Freeze).
Video Output:
Tolerance on f. line = +/- 25ppm (Quartzed).
Chroma Burst = Synchronized on f. line.
15.625 kHz / 50 Hz Interlaced (CCIR - 625 L).
15.735 kHz / 60 Hz Interlaced (RS 170 - 525 L).
• COMPUTER INPUT / OUTPUT (Loop-Through)
VGA Input:
RGB / HV Standard VGA.(SUB-D HD15 male connector).
VGA Output:
RGB / HV Standard VGA (SUB-D HD15 female connector).
WORKSTATION & MACINTOSH Input : RGB/HV or RGB + Sync (or Sync. On Green).
WORKSTATION & MACINTOSH Output : RGB/HV or RGB + Sync (or Sync. On Green).
Switch:
75 Ohms / high impedance (R, G, B).
Levels:
R, G, B = 3 x 0.7 Vp/p.
H & V Sync = TTL compatible or Interface ECL compatible (0.3 to 1.5 V).
SOG (Sync On Green) = 0.3 Vp/p.
• VIDEO OUTPUTS
4:2:2 D1 Output (OPTIONAL) (on BNC)
Signal:
SMPTE 259M (270Mbits).
Impedance:
75 Ohms.
RGB/S or RGsB Output (on BNC) :
Levels:
R, G, B = 3 x 0.7 Vp/p.
Sync = 2 Vp/p.
SOG = 0.3 Vp/p.
Impedance:
R, G, B, S = 75 Ohms.
Output Y, R-Y, B-Y (BETACAM
TM
, DVCAM
TM
, DVCPRO
TM
) on BNC:
Levels:
Y = 1 Vp/p (Sync + Luma).
R-Y = 0.7 Vp/p.
B-Y = 0.7 Vp/p.
Impedance:
75 ohms for Y, R-Y, B-Y.