Analog Way Studio Scan XTD620 User Manual
Page 15
STUDIO SCAN XTD 620 Chapter 8 : TECHNICAL SPECIFICATIONS
PAGE 15
• VIDEO OUTPUTS (continued)
S.VIDEO Output (4 pin mini DIN) :
Levels:
Y = 1 Vp/p (0.7 Vp/p Luma + 0.3 Vp/p Sync.).
C = 0.3 Vp/p (Burst Chroma).
Impedance:
75 Ohms (Chroma and Luma).
Composite PAL / NTSC Output (On BNC) :
Level:
1 Vp/p (0.7 Vp/p Luma + 0.3 Vp/p Sync).
Impedance:
75 Ohms.
• GENLOCK (INPUT / OUTPUT)
Black Burst:
PAL or NTSC (Loop through).
Impedance:
75 Ohms or Hi-Z.
• REMOTE PORT
Level:
RS-232.
Data Rate:
9600 bauds, 8 bits data, 1 bit stop, no parity bit, no flow control.
• ENVIRONMENTAL
Hardware Compatibility:
Line frequency: from 29 kHz to 85 kHz (Interlaced or not).
Resolution: up to 1280 x 1024.
Software Compatibility:
ALL software compatible with SUN®, SGI®, INTERGRAPH®, POWER PC®, POWER
MAC®, PC, MAC®.
Power Supply:
Internal CE / UL / CSA / IEC 950 (100W).
Input : 100VAC to 250VAC ; 50-60Hz ; I = 1A Max.
Temperature:
Storage : -25 °C to +85 °C.
Hygrometry:
10% to 80% (without condensation).
Dimension:
W 480 x D 300 x H 44 mm / 17” W x 11.82” D x 1.74” H.
(Compatible with 19” Standard, Height = 1 unit).
Weight:
2.5 kg / 5.5 Lbs.
The Device is in compliance with CE label.