Operational check for the remote control, Table 6 – remote control test – ARRIS DCX3600 User Guide User Manual
Page 31
Installation
Set-Top Entertainment Hub DCX3600-M • User Guide
24
365-095-25659 x.1
2. "UnPr" will be displayed on the front panel display during the un-pairing process.
3. "FAIL" will be displayed on the front panel display for five (5) seconds if the un-
pairing process failed.
Operational Check for the Remote Control
The operational check will test the remote control.
Table 6 – Remote Control Test
Feature
Testing Procedure
Power ON
Press Power on the remote control to turn ON the DCX3600-M.
Channel Selection
Scan through the channels using the Channel Up or Down keys.
Tune to several channels by entering the channel number using the numeric keys.
Volume Control
Press Volume Up or Down to increase or decrease the volume.
Press Mute to turn the sound off. Press Mute again to restore the sound.
If the DCX3600-M does not operate properly, refer to