Artesyn MVME7100 Single Board Computer Installation and Use (June 2014) - Manual (Page 85)

Transition Module
MVME7100 Single Board Computer Installation and Use (6806800E08D) 85
5.3 Features
The MVME7216E transition module is for I/O routing through the rear of a compact VMEbus
chassis. It connects directly to the VME backplane in chassis’ with an 80 mm deep rear
transition area. The MVME7216E is designed for use with the host MVME7100 board. It has
these features:
Table 5-1 Transition Module Features
Function Features
I/O One five-row P2 backplane connector for serial and Ethernet I/O passed from the SBC
Four RJ-45 connectors for rear panel I/O: four asynchronous serial channels
Two RJ-45 connectors with integrated LEDs for rear panel I/O: two 10/100/1000 Ethernet
channels
One PIM site with rear panel I/O
Figure 5-2 Block Diagram