Avery Dennison Monarch 9855 RFMP Quick Reference - Manual (Page 17)

17
RFID Errors
See the RFID Application Notes for more information.
Check with your System Administrator about the format.
The printer does not recalibrate (feed a blank label) after
an RFID error.
Error Description/Action
052 Data type in the RFID Data Field is invalid.
053 The starting block in the RFID Data Field is invalid.
226 Rule Record Line xx. Upload device is invalid.
228 Memory class identifier is invalid.
229 Byte code is invalid.
230 Lock code is invalid.
715 Invalid data length/data mismatch in the RFID Data
Field. This error also occurs when there is an error
in the Expanded C1Gen2 fields.
732 RFID Hardware Error. A non-RFID printer received a
format containing an RFID Data Field.
740 Command, hardware, or memory allocation error.
741 RFID tag missing - not found in the area inside the
printer where the RFID tag is programmed. Check
supply loading. Make sure the RFID tag was not
moved out of the programmable range.
742 Tag erase failed. The RFID tag was found in the RF
Field, but could not be erased.
743 Program tag failed. The RFID tag was found in the
RF Field, but could not be programmed.
744 Tag locked fail. The RFID tag is unable to be
programmed because it is already locked.
746 Lock tag fail. The RFID tag has not been locked to
prevent reprogramming.
747 Time out failure. An RFID command (read, program,
etc.) has failed to complete in the maximum amount
of allowed time.
748 Invalid data length/data mismatch from RFID
interrogator module.
749 RFID Verify Fail. The RFID verification process
failed after writing (programming) tag.