AVocation Systems MX-0404NAD/R - Manual (Page 16)

D22
MXxxAMoo(y)<CR>
Mute an audio output MX00AM03<CR>
absence of (y) will result in a toggle of the mute
adding (y) is optional for setting a mute directly
y = 0 turns off the mute for the output
y = 1 turn on the mute for the output
Toggle the mute of output 3
MX00AM021<CR>
Enables the mute for output 2
Response: MXxx-Audio=00 to oo<CR> (for each route made)
MXxxAPiiyy<CR>
Set the level adjustment for an audio input MX00AP0132<CR>
yy = 00 to 48
yy = 32 for 0dB pass
yy adjusts in 0.5dB steps
Sets audio input 1 to 0dB pass
Response: MXxx-Sensitivity ii set to yy<CR>
MXxxAPAyy<CR>
Set the level adjustment for all audio inputs MX00APA32<CR>
yy = 00 to 48
yy = 32 for 0dB pass
yy adjusts in 0.5dB steps
Sets all audio inputs to 0dB pass
Response: MXxx-Sensitivity ii set to yy<CR> (for each input changed)
MXxxAUooyy<CR>
Sets an audio output volume level MX00AU0132<CR>
yy = 00 (-64dB Minimum)
yy = 32 (0dB Pass Through)
yy = 48 (+32dB Maximum)
Sets audio output 1 to 0dB pass
Response: MXxx-Volume oo to yy<CR>
MXxxAUAyy<CR>
Sets all audio outputs to a volume level MX00AUA32<CR>
yy = 00 (-64dB Minimum)
yy = 32 (0dB Pass Through)
yy = 48 (+32dB Maximum)
Sets all audio outputs 1 to 0dB pass
Response: MXxx-Volume oo to yy<CR> (for each output changed)
MXxxAYoo<CR>
Step an audio output volume up one level MX00AY03<CR>
Step up audio output number 3 up one step
Response: MXxx-Volume oo to yy<CR>