AVocation Systems MX-0404NAD/R - Manual (Page 21)

D27
A/V Routing Commands
MXxxBiioo<CR>
Route an a/v input to an a/v output MX00B0103<CR>
Routes a/v input 1 to output 3
Response: MXxx-A/V=ii to oo<CR>
MXxxBiio1,o2,o3,o4,o5,o6,o7,o8,o9,o10<CR>
Route an a/vinput to as many as 10 outputs MX00B0101,02,03,04,05,06,07,08,09,10<CR>
Routes a/v input 1 to outputs 1 to 10
MX00B0101,02,03,04<CR>
Routes a/v input 1 to outputs 1 to 4
Response: MXxx-A/V=ii to oo<CR> (for each route made)
MXxxBAii<CR>
Routes an a/v input to all outputs MX00BA02<CR>
Routes a/v input 2 to all video outputs
Response: MXxx-A/V=ii to oo<CR> (for each route made)
MXxxBFoo<CR>
Turn an a/v output off MX00BF03<CR>
Turn off a/v output number 3
Response: MXxx-A/V=00 to oo<CR>
MXxxSB(oo)<CR>
Query for the status of an a/v route. MX00SB<CR>
Returns the status of all the a/v routes
MX00SB04<CR>
Returns the routing status of a/v output number 4
Response: MXxx-A/V=ii to oo<CR> (each output will be sent if output number not specified)
MXxxZ54(y)<CR>
Set/Read select digital with video MX00Z541<CR>
y = 0 digital will not switch with video Disconnect digital from routing with video
y = 1 digital will switch with video
if y is not used the current setting will be returned
Response: MXxx-Digital will switch with video<CR>