AVocation Systems MX-0404NAD/R - Manual (Page 2)

2
Read all instructions before connecting or operating the A/V Matrix. Pay particular attention
to the safety information. Keep this manual so you can refer to these safety instructions.
WARNING:
There are no user serviceable parts inside. Refer all servicing to
qualifi ed service personnel.
WARNING:
To reduce risk of fi re or electric shock, do not expose the RC-8-MX to
extreme heat, extreme cold, moisture or water. Do not allow foreign
objects to get into the enclosure. If the unit is exposed to moisture, or
a foreign object gets into the enclosure, immediately disconnect the
power cord from the wall. Take the unit to a qualifi ed service person
for inspection and the necessary repairs.
Clean the A/V Matrix only with a dry cloth or a vacuum cleaner. Do not use water, solvents,
or any other liquid to clean the A/V Matrix.
Place the A/V Matrix on a fi xed, level surface strong enough to support its weight. Keep the
A/V Matrix away from heat sources such as radiators, heat registers, stoves, or any other
appliance that produces heat.
The A/V Matrix from 90 to 250 VAC power sources It may also be operated from either 50
Hz or 60 Hz line frequencies. The unit is autosensing for power confi guration.
Connect the A/V Matrix to the power outlet only with the supplied 3-prong grounded power
supply cord or an exact equivalent. The cable should be connected to a properly grounded
3-conductor wall outlet. Do not modify the supplied cable in any way. Extension cords
must be rated for adequate current.
Do not route the power cord where it can be crushed, pinched, bent at severe angles,
exposed to heat, or damaged in any way. If the cord shows any sign of wear or damage,
immediately stop using it and obtain a proper replacement from a qualifi ed service agency
or from the Avocation Systems service department.
If the A/V Matrix shows signs of improper operation, or if it has been dropped or damaged
in any way, immediately disconnect the power cord from the power outlet. Take the
A/V Matrix to a qualifi ed service technician or send it directly to Avocation Systems for
inspection and the necessary repairs.