Video routing commands – AVocation Systems MX-0404NAD/R User Manual
Page 19
D25
MXxxZ60<CR>
Read sensitivty control enable/disable status
MX00Z60<CR>
Get the status of sensitivty control ability
Response: MXxx-Sensitivity control enabled<CR>
Response: MXxx-Sensitivity control disabled<CR>
Video Routing Commands
MXxxViioo<CR>
Route a video input to an video output
MX00V0103<CR>
Routes video input 1 to output 3
Response: MXxx-Video=ii to oo<CR>
MXxxViio1,o2,o3,o4,o5,o6,o7,o8,o9,o10<CR>
Route an video input to as many as 10 outputs
MX00V0101,02,03,04,05,06,07,08,09,10<CR>
Routes video input 1 to outputs 1 to 10
MX00V0101,02,03,04<CR>
Routes video input 1 to outputs 1 to 4
Response: MXxx-Video=ii to oo<CR>
(for each route made)
MXxxVAii<CR>
Routes a video input to all outputs
MX00VA02<CR>
Routes video input 2 to all video outputs
Response: MXxx-Video=ii to oo<CR>
(for each route made)
MXxxVFoo<CR>
Turn a video output off
MX00VF03<CR>
Turn off video output number 3
Response: MXxx-Video=00 to oo<CR>
MXxxSV(oo)<CR>
Query for the status of a video route.
MX00SV<CR>
Returns the status of all the video routes
MX00SV04<CR>
Returns the routing status of video output number 4
Response: MXxx-Video=ii to oo<CR>
(each output will be sent if output number not specified)