Digital routing commands, Mxxxdiioo<cr, Mxxxdaii<cr – AVocation Systems MX-0404NAD/R User Manual
Page 20: Mxxxdfoo<cr, Mxxxsd(oo)<cr, Mxxxz53(y)<cr
D26
Digital Routing Commands
MXxxDiioo<CR>
Route an digital input to an a/v output
MX00D0103<CR>
Routes digital input 1 to output 3
Response: MXxx-Digital=ii to oo<CR>
MXxxDiio1,o2,o3,o4,o5,o6,o7,o8,o9,o10<CR>
Route an digital input to as many as 10 outputs
MX00D0101,02,03,04,05,06,07,08,09,10<CR>
Routes digital input 1 to outputs 1 to 10
MX00D0101,02,03,04<CR>
Routes digital input 1 to outputs 1 to 4
Response: MXxx-Digital=ii to oo<CR>
(for each route made)
MXxxDAii<CR>
Routes an a/v input to all outputs
MX00DA02<CR>
Routes digital input 2 to all digital outputs
Response: MXxx-Digital=ii to oo<CR>
(for each route made)
MXxxDFoo<CR>
Turn an digital output off
MX00DF03<CR>
Turn off digital output number 3
Response: MXxx-Digital=00 to oo<CR>
MXxxSD(oo)<CR>
Query for the status of an digital route.
MX00SD<CR>
Returns the status of all the digital routes
MX00SD04<CR>
Returns the routing status of digital output number 4
Response: MXxx-Digital=ii to oo<CR>
(each output will be sent if output number not specified)
MXxxZ53(y)<CR>
Set/Read select digital with analog
MX00Z530<CR>
y = 0 digital will not switch with analog audio
Disconnect digital from routing with analog audio
y = 1 digital will switch with analog audio
if y is not used the current setting will be returned
Response: MXxx-Digital will not switch with audio<CR>