Baby Lock Crown Jewel (Previous Model) (BLCJ18) Instruction and Reference Guide Addendum - Manual (Page 6)

5. Roll the quilt top onto the quilt top rail
a) Do not pull and tug on the top as you are
rolling it
b) Smooth it, if needed, to roll it evenly
1- Run your hand over it the way you would
smooth the sheets when making the bed
C. Attach the quilt back to the leader on the
backing rail
1. Lay quilt back over the top of the frame with the
wrong side up
2. Mark the center of the back with a pin
3. Unroll the leader on the backing rail
4. Pin the quilt back to the leaders
a) Match the center of the quilt backing to the
center mark on your leader
5. Roll the back onto the backing rail
a) Do not pull and tug on the back as you are
rolling it
b) Smooth it, if needed, to roll it evenly
c) Run your hand over it the way you would
smooth the sheets when making the bed
D. Roll the batting onto the batting rail
1. There is no leader for the batting rail, so the
batting will be attached directly to the rail
2. An easy way to attach the batting to the rail
is to use painters tape
a) A mark on the tape can be used to center
the batting on the rail
3. Spread the batting on the floor
4. Roll the batting onto the batting rail
Now we have all three layers of our quilt loaded
onto the rails at the front of the frame!
5